KT-LCD3 LCD Meter for KT-Series Controlers

To enable volume discounts on this site, You will see a discount applied at the bottom of the shopping cart. Competitive pricing is available. Contact us for details.

You can place the order on website: www.elifebike.com
Our website elifebike.com can calculate shipping cost automatically before you check out.

KT-LCD3 E-Bike LCD Meter for KT Series Controllers. It only fits KT series controllers. It is not suitable for other controllers.

1. Dimension: 12x64x95mm.

2. Voltage: fits for 24V, 36V or 48V batteries.

Note: How to determine the value of the parameter P5 ?

The formula is LVC+P5/3.77.

For 24V battery, LVC=20V, P5/3.77=1. 

For 36V battery, LVC=30V, P5/3.77=1.5.

For 48V battery, LVC=40V, P5/3.77=2.

You can adjust P5 parameter by your own battery discharge curve.

It is a smart LCD. You can not test it by only voltage. You need to install it on your E-Bike and pedal for 3-5 seconds. Then the LCD will show battery level normally.

Panel cable Length: 30cm

Water proof Cable Length: 22cm+160cm=182cm

Motor power display: always 0 ---solve problem way

Parameter C11 was wrong. It was on 1,
The correct value for LCD3 is 0.
After change it from 1 to 0,
Everything works correctly